Skip to main content

Custom Wardrobe Installation in Sydney

Sultan’s Wardrobes measures, manufactures and installs made-to-measure wardrobes across Sydney. Most standard built-in wardrobe installations are completed in one day. We check the room before manufacture, fit each wardrobe to the measured opening and make the final adjustments on site. Installation is included in our wardrobe quotes, with a 10-year warranty on workmanship and wardrobe components.

This page explains what happens on installation day, how to prepare your room and what may affect the fitting. This guide covers custom wardrobes supplied and fitted by Sultan’s Wardrobes, rather than general flat-pack assembly.

Typical on-site installation

Usually 1 day

For most standard built-in robes. Larger or multi-room projects may take longer.

Approval to installation

Around 2–6 weeks

Typical manufacture and scheduling lead time after approving the quote, not days spent installing.

A free site measure is usually arranged within one week of enquiry (allow 20–60 minutes), followed by a written quote usually within two days of the measure. Actual timing depends on the project and scheduling.

What happens on wardrobe installation day?

Our installation process follows the measurements and plans prepared for your room. The steps below describe the usual fitting sequence; the exact order can vary with the type of wardrobe and site conditions.

  1. Set out and level the base. We check the position of the cabinetry and establish a level base, using suitable packers where the floor is uneven.
  2. Position and secure the wardrobe sections. The made-to-measure carcasses are brought into alignment and fixed as appropriate for the wall and design.
  3. Scribe and finish the edges. Panels and fillers are fitted around out-of-square walls, cornices, bulkheads or ceiling junctions where needed.
  4. Fit the storage internals. Hanging rails, shelves, drawers and specified storage accessories are installed and adjusted.
  5. Fit and align the doors. For sliding wardrobes, we fit tracks and adjust rollers; for hinged wardrobes, we align the hinges and door gaps. Open walk-in robes may not require doors.
  6. Complete the final functional check. Doors and drawers are checked for smooth, unobstructed operation, including drawer clearance around sliding door positions.

What the homeowner should expect: standard fitting is generally completed within one day, but larger walk-in rooms, complicated openings or several wardrobes can require more time. We confirm the expected scope and timing during the quotation process.

How to prepare your room for installation

These practical preparations help the fitting team reach the room and work with fewer interruptions:

  • Empty the wardrobe area. Remove clothing, loose items and fragile belongings; move furniture away from the wall and working area.
  • Clear a delivery pathway. Make sure large cabinetry sections can be carried from the entrance to the room, and tell us about narrow doors or stairs.
  • Confirm property access. Arrange access for the installation appointment and let us know about parking or loading restrictions.
  • Check apartment requirements. If your building has lift bookings, loading rules or permitted work hours, confirm them with building management and let us know beforehand.
  • Raise existing-wardrobe removal early. Removal and disposal is a separate paid add-on; it needs to be discussed and included in the quote.
  • Tell us about other renovation work. Painting, flooring, electrical work or wall repairs can affect when the wardrobe should be installed.

Unsure whether your room will be ready? Mention any access or renovation concerns at the free measure so we can plan the job around the actual conditions.

What is included in a Sultan’s Wardrobes installation quote?

Installation is included in every quote for the made-to-measure wardrobes we supply. The quoted design determines the doors, internals, panels and fittings to be installed; there is no separate standard fitting fee added after the wardrobe price is agreed.

Part of the quoted wardrobe work

  • Site measurement and agreed layout
  • Made-to-measure wardrobe cabinetry and specified internals
  • Installation, fitting and alignment of the quoted components
  • Final operational adjustments and 10-year warranty on workmanship and wardrobe components

Check or quote separately

  • Removal and disposal of an old wardrobe (paid add-on)
  • Any wall, floor or ceiling repairs outside the agreed joinery work
  • Electrical work or renovation work affecting the installation area
  • Unusual access, building restrictions or other site-specific requirements

The second list identifies items to discuss before approval; it does not imply Sultan’s Wardrobes performs every type of electrical, structural or building work. Review the written scope and any exclusions before confirming the job.

What can make wardrobe installation more complex?

Made-to-measure installation accounts for actual room conditions rather than assuming every opening is straight, level and easily accessible.

Room or site condition How it affects the work
Uneven walls or floors Levels, scribing and filler details need to match the measured opening.
Raked ceilings, bulkheads or cornices Panel heights and finishing details must allow for the ceiling and surrounds.
Apartment and strata access Lift, parking, delivery and permitted work arrangements may need advance planning.
Replacing an existing robe Removal is priced separately, and exposed marks or floor differences may require further work.
Multiple rooms or larger walk-ins More cabinetry and components may extend the on-site installation beyond one day.

Older Sydney homes, sloping ceilings and apartment buildings may require particular attention, but suitability is established at the measure. See our wardrobe dimensions guide for the measurements that influence wardrobe configuration.

From your first enquiry to the finished wardrobe

The fitting itself is only one part of a made-to-measure project. The broader sequence is:

  1. Enquire and arrange a free measure. We normally attend within one week; the visit generally takes 20–60 minutes. We check width, height, depth, floor level, walls, access and your storage needs.
  2. Receive a written quote. This is usually provided within two days of the measure. The quote covers the approved cabinetry specification and installation.
  3. Approve and manufacture. The wardrobe is made to the site measurements in our Bankstown workshop. The typical lead time from approval to installation is approximately 2–6 weeks, subject to scheduling and design.
  4. Install and check. Most standard built-in robes are fitted in one day, with doors and drawers adjusted before the job is completed.

For a more accurate budget before booking, see our built-in wardrobe cost guide or walk-in wardrobe cost guide. Those pages explain the price variables; this page focuses on how the finished wardrobe is fitted.

Removing or replacing an old wardrobe

We can remove and dispose of an existing wardrobe as a paid add-on to a new wardrobe installation. Let us know before the job is approved so the removal and disposal can be assessed and included in the written quote.

An old built-in may leave fixing marks on the walls or flooring differences beneath the original unit. Those surfaces may need attention outside the agreed new wardrobe installation. If the existing structure is suitable, replacing the doors rather than the entire wardrobe may be worth discussing at the measure.

See our wardrobe renovation guide for removal, replacement and make-good considerations.

Who installs your wardrobe, and what happens afterwards?

Sultan’s Wardrobes manages the measure, manufacture and installation rather than handing the fitting to an unrelated provider. Sultan is directly involved in measuring and installing wardrobes, with help where a larger project requires it. The details measured on site are carried through to the cabinetry made in the Bankstown workshop.

Every installed wardrobe comes with a 10-year warranty on workmanship and wardrobe components. If a door or drawer needs an adjustment after fitting, contact us so the issue can be assessed. Warranty coverage is subject to the applicable written terms.

Wardrobe installation throughout Sydney

From our Bankstown workshop, we supply and install custom wardrobes across metropolitan Sydney, including the Inner West, Eastern Suburbs, North Shore, Northern Beaches, Hills District and Western and South Western Sydney. You can explore the service areas or learn about the types of wardrobes we manufacture and fit:

This installation guide is for the custom wardrobes Sultan’s Wardrobes supplies. For a new wardrobe, the next step is a free room measure and quote.

Wardrobe installation FAQs

These answers cover common practical questions about fitting a made-to-measure wardrobe. Installation duration, preparation and quote scope are also explained above.

How much does wardrobe installation cost?

Installation is included in our quoted price for made-to-measure wardrobes supplied by Sultan’s Wardrobes, rather than charged as a separate standard fitting fee. Your total depends on the wardrobe’s size, doors, internals, finish and site conditions. See our built-in and walk-in wardrobe cost guides for budgeting details.

How long does a built-in wardrobe take to install?

Most standard built-in wardrobes are installed in one day. Larger walk-in fit-outs, multiple rooms or more complex site conditions can take longer. The typical 2–6-week period after approval refers to manufacture and scheduling before fitting.

What should I do before installation day?

Empty the wardrobe area, move nearby furniture and clear a path for delivery. Let us know about stairs, access restrictions, parking, lift bookings or other renovation work before the installation appointment.

Can you remove and dispose of my old wardrobe?

Yes, when replacing an existing wardrobe, removal and disposal are available as a paid add-on. Raise this at the measure so the work can be assessed and included in the quote.

Can you fit a wardrobe to uneven walls or a raked ceiling?

Yes. We measure irregular walls, floors, cornices, bulkheads and ceiling slopes before manufacture and plan suitable fillers or shaped panels for the opening. The precise solution depends on the room.

Do you install wardrobes in apartments?

Yes, across Sydney. Let us know about building management requirements, loading areas, lift bookings, permitted work hours and access restrictions so installation can be planned.

When should the wardrobe be installed during a renovation?

Tell us what painting, flooring, electrical or wall work is scheduled. We’ll discuss the practical installation sequence at the measure, because the right timing depends on your renovation.

Do you install wardrobes supplied by another company?

Our standard process covers wardrobes we measure and manufacture. If you already have a wardrobe from another supplier, contact us with its details so we can advise whether we can assist. We can’t assume installation-only work is included in our made-to-measure wardrobe quote.

What warranty covers the wardrobe installation?

Our made-to-measure wardrobes are covered by a 10-year warranty on workmanship and wardrobe components, subject to the written terms. If an adjustment is needed after installation, contact Sultan’s Wardrobes.

Book a free measure and wardrobe installation quote

For a wardrobe that fits your room properly, start with an accurate on-site measure. Tell us the wardrobe type, your preferred doors and storage, and any access or removal requirements. We’ll measure the room, discuss the design and provide a written quote, usually within two days of the measure, with installation included.

If you want to compare options first, explore our built-in wardrobes or walk-in wardrobes.

Ready to Have Your Wardrobe Measured and Installed?