What Do Our Clients Say About Our Custom Wardrobes?


Sultan’s Wardrobes designs, makes and installs custom built-in and walk-in wardrobes across the Eastern Suburbs. Every robe is measured in your home, made to measure in our Sydney workshop and fitted to the room it’s built for.
That matters here more than most parts of Sydney: Victorian terrace bedrooms with chimney breasts, Federation houses with high ceilings and decorative cornices, Art Deco flats with solid masonry walls, and new apartments with bulkheads and strict building rules all need a different wardrobe.
Choose from sliding, hinged or mirrored wardrobe doors, and plan the hanging, shelving, drawers and overhead storage around what you actually need to store.
1 week
Usually measured within a week of your enquiry
1–2 days
Written quote, often on the day, installation included
2–6 weeks
Made to measure in our Sydney workshop
1 day
Most built-in robes installed in a single day
Few parts of Sydney pack so many housing eras into so few streets. The type of home decides where the robe can go, how tall it can be, how it’s fixed to the wall and even how the panels get into the room.
Terrace bedrooms in Paddington, Woollahra and Queens Park are often long and narrow, with a fireplace and chimney breast on one wall. The recesses either side make natural alcove wardrobes: two built-in robes that sit flush with the face of the chimney breast, so the room keeps its symmetry and the fireplace stays the feature.
When the bed sits close to the robe, sliding doors avoid the swing space that hinged doors need. Where there’s room, hinged doors give full access and suit the period character of the house.
Federation houses in Randwick, Clovelly, Kensington and Rose Bay, and inter-war bungalows through Maroubra, Kingsford and Matraville, usually have ceilings well above the 2.4m of a modern home. A floor-to-ceiling wardrobe turns that height into overhead cupboards for luggage, spare bedding and seasonal clothes.
The robe can stop just below the cornice or picture rail so the original plasterwork stays visible, or finish to the ceiling with a top filler scribed around the profile. End panels are scribed to walls that are rarely plumb, and the kickboard is packed level across timber floors that are rarely level.
If your home is a listed heritage item, check with your council before removing or altering original features such as fireplaces or existing joinery. We can design the wardrobe around the features you want to keep.
The inter-war blocks of Bondi, Coogee and Rose Bay often have compact bedrooms, masonry walls and original built-ins too shallow for coat hangers. A replacement robe built to a proper hanging depth (we normally build to around 600–650mm) is fixed with masonry fixings, and mirrored sliding doors make a small room feel larger.
Newer apartments in Bondi Junction, Randwick, Kensington and Kingsford tend to have plasterboard walls and bulkheads for ducted air-conditioning. We measure around the bulkhead and finish with bulkhead infill. Tell us about lift bookings, loading docks and work hours when you book.
In Vaucluse, Bellevue Hill, Dover Heights and Double Bay the brief is often a walk-in robe off the main bedroom, sometimes leading to the ensuite. The layout – galley, L-shaped or U-shaped, or split into his-and-hers zones – follows the room’s dimensions and aisle width.
Planning a Wardrobe for an Older Home?
We’ll measure around cornices, chimney breasts and uneven walls, and quote with installation included.
Many Eastern Suburbs streets were laid out long before cars and trades vans. Terraces often have no driveway, parking is limited and resident parking schemes are common. A few details at booking help installation day run smoothly:
Because one business measures, makes and installs your wardrobe, the access details recorded at the measure go straight into how it’s made and delivered. See our wardrobe installation page for the full process.
Every wardrobe is built from 16–18mm HMR (high moisture resistant) board – worth having in beachside homes in Bondi, Bronte, Coogee and Maroubra.
Not sure which door suits your room? Compare sliding vs hinged wardrobe doors, or check depths, heights and aisle widths in our wardrobe dimensions guide.
Price depends on the wardrobe’s size, doors, internals and finishes, and on room conditions such as high ceilings, cornices or uneven walls.
Projects from
$1,200
Typical 2.4m wardrobe
$1,500 - $3,500
depending on specification
Premium finishes, extensive internals and floor-to-ceiling designs may cost more.
These figures are a guide. Our built-in wardrobe cost guide and walk-in wardrobe cost guide explain what drives the price, and the free measure gives you a written quote for your room.
We measure, make and install wardrobes throughout the Eastern Suburbs, including:
Don’t see your suburb? We install wardrobes in all Sydney suburbs – see our page on wardrobes on the Northern Beaches, or custom wardrobes in Sydney.
From the first call to the finished robe, the process is simple and planned around your home.
Bring Your Wardrobe Ideas to Life
Tell us what you need to store and how you want it to look. We’ll design, make and install a wardrobe to suit.
Sultan’s Wardrobes has specialised in custom wardrobe design, manufacture and installation across Sydney for more than 20 years.
With 20+ years of experience, wardrobes are our focus – from bedrooms and apartments to complete dressing spaces.
Every wardrobe is measured and made for your room, with layouts tailored around your space and storage needs.
You deal directly with the owner from the in-home measure through to installation, rather than being passed through a salesperson.
Our wardrobes are backed by a 10-year warranty covering workmanship and wardrobe components.
Yes. We measure, make and install custom built-in and walk-in wardrobes throughout the Eastern Suburbs, including Paddington, Woollahra, Double Bay, Rose Bay, Vaucluse, Bondi, Bondi Junction, Bronte, Coogee, Clovelly, Randwick, Kensington, Kingsford and Maroubra. The measure and quote is free.
Yes. We check the access route at the measure, including hallway width and stair turns. The wardrobe is then made as separate carcasses sized to fit through, and assembled, fixed and scribed in the bedroom.
Yes. The recesses either side of a chimney breast are well suited to alcove wardrobes. Each robe is built to the exact width and depth of its recess, so they sit neatly beside the chimney breast and keep the fireplace as the room’s feature.
It doesn’t have to. The wardrobe can stop just below the cornice or picture rail so the original plasterwork stays intact, or be finished to the ceiling with a top filler scribed around the cornice profile. We’ll talk through both options at the measure.
Yes. We install wardrobes in apartments and strata buildings across the Eastern Suburbs. Let us know about lift bookings, loading docks, parking and work-hour rules when you book, and we’ll plan installation day around them.
We usually measure within a week of your enquiry, and the quote is usually provided on the day or within 1–2 business days. Manufacture takes approximately 2–6 weeks, and most built-in wardrobes are installed in one day.
Yes. Removal and disposal of an existing wardrobe is available as a paid add-on. Let us know at the measure and we’ll include it in your quote.
Built-in wardrobes start from around $1,200. The final price depends on the wardrobe’s size, doors, internals and finishes, and on room conditions such as high ceilings, cornices or uneven walls. The free measure gives you a written quote for your room.
Planning a wardrobe for your Eastern Suburbs home?
Whether it’s a pair of alcove robes in a Paddington terrace, a floor-to-ceiling wardrobe in a Randwick Federation home or a walk-in robe in Vaucluse, the first step is an accurate measure.
We can usually attend within one week, the measure takes approximately 20–60 minutes, and your quote is normally supplied on the day or within 1–2 business days.
Sultan’s Wardrobes
Sydney, NSW
ABN: 33 669 961 504
20+ Years Experience | Made to Measure | Professional Installation | Sydney Wide